Reliability engineering that keeps plants running.
Forensic diagnostics, reliability-centred maintenance and independent technical sign-off for high-speed FMCG, food, pharmaceutical and automated logistics sites.
Most sites don't run reactive because nobody knows better. They run reactive because the people who know better are too consumed by breakdowns to ever get ahead of them.Jordan Charles Watson, IEng · Director, Optimal: Engineering Excellence Ltd
Three ways in. One standard of evidence.
Forensic diagnosis
Prove the failure mechanism and engineer the corrective action, from first fault to component level. Findings built to withstand adversarial review.
Reliability transformation
Make root cause analysis the site standard, build planned maintenance around failure modes and train site teams to run it after we leave.
Technical sign-off
Independent commissioning acceptance and handover, GMP change control and machinery-safety design to PUWER 1998 and BS EN ISO 13849-1.
Catastrophic failure of PTFE aseptic valve bellows under hydraulic dead-head transient.
A 54-head aseptic rotary can filler lost over half its valve bellows in a single clean-in-place cycle. The OEM and the CIP integrator each blamed the other. The specimens were read first, five competing mechanisms were eliminated on physical evidence, and a calibrated recorder then confirmed the transient. The result: a six-node evidenced causal chain and a three-tier corrective framework.
Outcomes, with the basis stated.
Independent sign-off at four hubs
Controlled the technical acceptance that released multi-million-pound OEM milestone payments, holding acceptance until punch-list items closed.
Commissioned to 85% OEE, then restored it
Lead commissioning engineer for a production centre generating £600m+ a year; returned as subject matter expert to reverse the decline.
Drive fault cleared without changing parts
The OEM rated the fault as an IGBT failure and a nine-hour outage. Knowledge of the drive's internal fault handling had the line at full speed in 35 minutes.
Safety retrofit in four hours
Engineered a dual-channel safety architecture with a monitored reset and installed it in a planned stop. Compliant production within 48 hours of the finding.
Water recovery doubled
A mass balance found the isolated secondary inlet. Reinstated with staged lead-lag recovery, without chatter or water hammer.
Pharma line throughput doubled
Redesigned the outfeed to use idle robotic capacity, and held engineering sign-off as technical authority on GMP change control.
A diagnostic, a target, the fix, and an exit.
Diagnostic
On the floor, to the failed component. Losses quantified in downtime, OEE and compliance exposure.
Quantified target
An agreed, measurable outcome and the authority over the reliability function to deliver it.
The fix
Hands-on technical leadership: the mechanism proven, the corrective action engineered and installed.
Handover and exit
RCA and PPM discipline embedded, then we stay long enough that your shift teams own it.
Measurable or it didn't happen.
Jordan Charles Watson IEng
Director and principal engineer of Optimal: Engineering Excellence Ltd. Fourteen years across FMCG, food, pharmaceutical and automated logistics, from a five-year AstraZeneca apprenticeship to independent technical authority over multi-million-pound assets.
Every engagement is carried end to end by the engineer whose name is on the finding. No junior drafting layer, and no partner who sells the work and hands it on.
- Registration
- Incorporated Engineer (IEng), Engineering Council, through the Society of Operations Engineers
- Electrical
- City & Guilds 2382-22, BS 7671 Requirements for Electrical Installations (18th Edition)
- Steam
- BOAS accredited steam systems maintainer and modifier
- Education
- HNC Electrical Engineering · Level 3 Extended Diploma, Multi-Skilled Maintenance Engineering · Five-year Level 4 technical apprenticeship, AstraZeneca
- Standards practised
- PUWER 1998 · BS EN ISO 13849-1 · BS EN 60204-1 · SI 2008/1597 · BS 7671
- Basis
- Business to business, outside IR35 by preference · Based in Burton upon Trent, Staffordshire · UK-wide
Bring the failure that won't stay fixed.
Interim, contract and project engagements across the UK.